Wireless connection has “limited connectivity”

  1. Check your Internet Connectivity : If you have consistent connectivity to Internet using your Smartphone?
  2. Another Laptop / PC is connected to Internet?
  3. Connect the Laptop to your Router using an Ethernet Connection Cable directly to one of its LAN ports.

If none of the above is positive then the issue is Internet Connectivity with your ISP Device (Modem/Router)

IF 1 & 2 are positive that means the issue is with your laptop.

If 3 is also positive then the issue is with the Wifi connection in your Laptop.

  • Follow the following steps to resolve Wifi issues on your Laptop.
  • Open Control Panel – Select Network and Sharing Center – Manage Wireless Networks – Highlight your Wifi Network – Right Click and Remove.
  • Reset the TCP/IP stack of the windows system with limited connection status.

https://support.microsoft.com/en…

To manually reset TCP/IP, follow these steps:

Note You must be logged on to the computer as an administrator to perform the steps.

For Windows 8 and Windows 8.1

  1. On the Start screen, type CMD. In the search results, right-click Command Prompt, and then click Run as administrator.
  2. At the command prompt, enter the following command, and then press Enter:netsh int ip reset c:\resetlog.txtNote If you don’t want to specify a directory path for the log file, run the following command instead:netsh int ip reset
  3. Restart the computer.

For Windows 7 and Windows Vista

  1. To open a command prompt, click Start and then type cmd in the Search programs and files box.
  2. Under Programs, right-click the CMD.exe icon, and then click Run as administrator.
  3. When the User Account Control box appears, click Yes.
  4. At the command prompt, enter the following command, and then press Enter:netsh int ip reset c:\resetlog.txtNote If you don’t want to specify a directory path for the log file, run the following command instead:netsh int ip reset resetlog.txt
  5. Restart the computer.
Advertisements

Creating a bootable USB flash drive

  1. Insert a USB flash drive into a running computer.
  2. Open a Command Prompt window as an administrator.
  3. Type diskpart.
  4. In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
  5. At the command prompt, type select disk <X>, where X is the drive number or drive letter of the USB flash drive, and then click ENTER.
  6. Type clean, and the click ENTER. This command deletes all data from the USB flash drive.
  7. To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.
  8. To select the partition that you just created, type select part 1, and then click ENTER.
  9. To format the partition, type format fs=ntfs quick, and then click ENTER.
    Kind Note 😀
    If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
  10. Type active, and then click ENTER.
  11. Type exit, and then click ENTER.
  12. When you finish preparing your custom image, save it to the root of the USB flash drive.